Isolation rooms Isolation rooms for contagious (negative pressure) and immunodeficient (positive pressure) patients.

Hepa-Net II

Hepa-Net II

Description

Source capture unit, installed on the wall, above the patient's head, with controls outside the room. Provides the best protection for healthcare workers and visitors.

Characteristic

- Wall Mounted
- 2-Stage Air Purification Process
- 2-Two Speed, Dual Inlet, Sealed Bearing Blowers
 

Electricity

Main: 115V-1-60 3.9 FLA - 5.3 FLA
Control: 24V.
*30 Feet of cable supplied with unit.

Controles

2 fans, 2 speeds : low speed : 400 CFM, high speed : 600 CFM
 

Filtration

Main filter: HEPA Filter rated at 99.97% @ 0.3 microns
Size: 45" x 16" x 2"

Construction: Aluminium frame that is lined with a gel seal gasket assuring an airtight seal around the edges.

 

UV Irradiation

30 Watts, germicide
Duration : 7 000 hours
 

Dimensions

40 1/8' H x 49 7/8' W x 10 ½' D
 

Weight

110 lbs
 

Principle

The HEPA-NET is designed to create an air current that directs airflow from critical area through a 2-stage air purification process and then exhausts it accordingly.
 

Conception criteria

The unit installs on the headwall directly behind and above the patient's hospital bed for optimal air changes.

Ideal for renovating patient rooms into an isolation room or increasing ACH of an existing room.
 
Germicide ultraviolet irradiation

Lenght: 36"

Quantity: One Lamp Per Unit

Wattage: 30 Watts

Wavelenght: 253.4 nm

Functionality: The location of the lamp allows for irradiation of both the upstream side of the HEPA filter and of the incoming air stream.