Aeromed 800C
Description
The AeroMed 800C is a low profile air purifier that is designed to fit in a 2' x 4' ceiling grid. It removes airborne micro-contaminants and can be used for recirculation or exhaust filtration. The unit combines a 30% pre-filter and 99.97% HEPA filter to provide optimal air purification. The AeroMed 800C is an excellent choice for smaller areas where controlling airborne contaminants may be a concern. Typical applications include isolation and exam rooms. Once air is passed through the HEPA filter, it may be recirculated back to the room or used to create negative pressure by exhausting from the room.
Characteristic
The 800C includes many advanced features that facilitate easy installation, operation and maintenance.
Easy Installation
The AeroMed 800C comes as two separate components in order to facilitate easy installation by one person. The lightweight aluminium filter housing, which weighs less than 10 pounds, is simply laid in the ceiling grid and then attached to the support system. Once the filter section is secured, the heavier fan section is placed on top of the filter section and secured.
Easy Operation
The AeroMed 800C is controlled by a variable speed rheostat that is located on the top of the unit. The customer may opt to have the speed control located remotely or to have the unit speed controlled by a room pressure monitor.
Easy Service
The AeroMed 800C's easy to open service door provides room side access to the pre and HEPA filter section when the need for replacement arises. The access door is held securely in place be recessed door latches that do not detract from the unit's aesthetics. A retainer clip on the filter access door prevents the pre-filter from falling out of the unit when the door is opened. A unique HEPA clamping device allows for one person to easily and safely change the HEPA filter.
Ducting Choices:
The AeroMed 800C comes standard with four exhaust ports. The use mau choose utilize any number of these ports allowing for multiple configurations such as:
Exhaust only
Recirculation and exhaust
Recirculation to multiple points in one room.
Electricity
115 volts @ 60Hz250 watts
2.2 amps
Fuse : Internal 5 amp
Filtration
Delivered Air :800CFM
High350CFM
Low in room up to 14' x 14' x 8'
Dimensions
23.77" D x 47.8" W x 20" HConception criteria
Plug : Hard wire is standard, Hospital grade plug option availableFilter Housing : 060 aluminium with white powder paint coat finish on room side surface
Fan Housing : 16ga galvanized sheet metal
Remplacement filters
Pre-Filter : 30% ASHRAEFilter : 99.97% DOP
Options
The AeroMed 800C is available with remote speed control and filter gauge options for applications where ceiling access is not convenient or possible.
Option 1 - AM-RCP-R
Remote mounted rheostat and filter gauge allows user to turn the unit on or off and adjust the speed from a remote location. This option also includes a filter gauge which determines proper change out intervals and an hour meter which displays hours of equipment operation. The controls of this wall mounted unit are protected behind a locked lexan panel.
Option 2 - AM-RCP-K
This option is the same as #1 above except it uses a two speed key switch to toggle the units operation between high and low settings.
Option 3 - AM-TRK
This option allows the AM800C to be remotely controlled by a room pressure monitor. The unit is set to run at low speed until the room pressure monitor detects a loss of negative pressure. At that time the monitor sends a signal to increase the fan speed to high in an attempt to compensate for the loss of room pressure. This device may also be configured to display the filter pressure and go into alarm when it is time to change the filter.