Aeromed 600C
Description
The AeroMed 600C is a low profile air purifier that is designed to fit in a 2' x 2' ceiling grid. It removes airborne micro-contaminants and can be used for recirculation or exhaust filtration. The unit combines a 30% pre-filter and 99.97% HEPA filter to provide optimal air purification. The AeroMed 350C is an excellent choice for smaller areas where controlling airborne contaminants may be a concern. Typical applications include isolation and exam rooms, waiting areas and procedure rooms. Once air is passed through the HEPA filter, it may be recirculated back to the room or used to create negative presssure by exhausting from the room.
Characteristic
The AeroMed 600C includes many advanced features that facilitate easy installation, operation and maintenance.
Easy Installation
The AeroMed 600C comes as two separate components in order to facilitate easy installation by one person. The lightweight installation sleeve slides into a opening in the ceiling and is supported from above with threaded rod. Once the installation sleeve is secured, the fan section slides up and through the sleeve and is sealed and sealed into place.
Easy Operation
The AeroMed 600C is controlled by a remote, keyed, on/off switch that is mounted on the wall below. The customer may opt to have a filter pressure guage and/or hour meter on the remote control panel.
Easy Service
The AeroMed 600C's easy to open service door provides room side access to the pre and HEPA filtersection when the need for replacement arises. The access door is held securely in place by four counter sunk screws. The pleated pre-filter sits above the perforated access door. The gel seal HEPA filter is held in place by two swiveling retention clips. One person can easily and safely change the HEPA filter.
Ducting
The AeroMed 600C comes with a single four inch round exhaust port or 3 " x 6 " rectangular port for connection to hard or flex duct.
Blower
Delivered Air 600 CFM - High
275 CFM - Low
≥12 ACH in room up to 19’ x 19’ x 8’
Electricity
Voltage : 115 volts @ 60Hz
Wattage : 290 watts
Amperage : 2.6 amps
Plug : Hard wire is standard, Hospital grade pug option available
Fuse : Internal 5 amp
Sound Level : 66 dBA
Dimensions
16"D x 16"W x 10.5"H
Conception criteria
Filter Housing : 18 ga galvanized sheet metal with gloss white powder coat paint finish on room side surface.
Fan housing : 18 ga galvanized sheet metal
Remplacement filter
Pre-filter 30% ASHRAE
HEPA 99.97% DOP
Options
The Aeromed 600C is available with remote speed control and filter gauge options for applications where ceiling access is not convenient or possible.
Option # 1 : AM-RCP-R
Remote mounted on / off switch, filter gauge and power indicator light. This option includes a filter gauge which helps determine proper change out intervals and an hour meter which displays hour of equipment operation. The controls of this wall mounted unit are protected behind a locked lexan panel.
This option allows the unit to be controlled in order to maintain a set exhaust volume.